How to Fix the White Light on PS4 [6 Ways]

Why is my PS4 light white and not turning on?

The "white light of death" on a PS4 can arise from various hardware or software issues. Common causes include:

※ HDMI connection: A defective HDMI cable can trigger the white light of death error on the PS4.

※ Overheating: Insufficient ventilation can cause the PS4 to overheat, potentially shutting it down or triggering the error.

※ Power supply issues: A damaged power supply or cable might prevent the console from receiving adequate power, causing the white light of death to appear.

※ Hardware malfunction: Internal issues with components like the hard drive or motherboard can also result in this error.

The "white light of death" can have multiple causes, and identifying the exact reason may not always be straightforward. In some cases, professional repair or even console replacement may be required.

How to fix the white light on PS4

After recovering your lost PS4 game files using reliable software, here are some effective methods to resolve the PS4 white light of death issue:

Way 1. Check HDMI connection

Begin by inspecting the HDMI connection between your PS4 and TV, as a loose HDMI cable is a common cause of the PS4 white light of death. Follow these steps:

Step 1. Disconnect the HDMI cable from both the console and the TV.

Step 2. Check the ports and cables for any dirt or damage.

Step 3. Inspect the HDMI ports on both the TV and console to ensure they are clean and in good condition.

Step 4. Finally, reconnect the HDMI cable and check if the issue is resolved.

Way 2. Check hardware issues

Hardware damage is a frequent cause of the PS4 white light of death (WLOD). If your PS4 has been physically impacted, internal components may be compromised. To check for hardware issues:

Step 1. Make sure your PS4 is properly plugged into a power outlet and all cables are securely connected.

Step 2. Power on the console and listen carefully for any unusual sounds.

Step 3. If you hear grinding noises or notice sparks inside the PS4, immediately unplug it and reach out to Sony for support.

Way 3. Update/Reinstall the controller drivers

Surprisingly, outdated controller drivers can sometimes trigger the PS4 white light of death. Updating to the latest drivers may help resolve the issue. Here's how to do it:

Step 1. Press "Win + R" to open the Run dialog box.

Step 2. Type devmgmt.msc and press "Enter".

Step 3. Right-click on your device and select "Uninstall". Make sure to check the box for "Delete the driver software for this device" and then click "Uninstall".

Step 4. Reconnect the PS4 to your PC.

Step 5. Visit the manufacturer's website to download and install the latest compatible driver.

Way 4. Reset PS4 controller and console

If updating your controller drivers didn’t fix the issue, try resetting your PS4. Keep in mind that a full reset may result in data loss.

Step 1. Press and hold the power button until the console powers off completely.

Step 2. Once the PS4 is off, disconnect all cables.

Step 3. Allow the console to rest for 2-3 minutes.

Step 4. Reconnect all cables and power the console back on.

Way 5. Enter safe mode

If the previous methods haven't worked, try entering Safe Mode on your PS4.

Step 1. Turn off the PS4 completely.

Step 2. Press and hold the power button until you hear a second beep.

Step 3. Connect your PS4 controller to the console using a USB cable and press the PS button.

Step 4. Your PS4 will enter Safe Mode, where you can perform a factory reset by reinitializing the console.

Way 6. Update your PS4 firmware

If the issue continues, it could be related to a software problem. Updating your firmware to the latest version might resolve it.

Step 1. Go to Settings > System Software Update and follow the on-screen instructions.

Step 2. After the update is complete, restart your PS4.

Bonus tip: How to recover data from the Problematic PS4

If the previous steps haven’t resolved the issue, it’s a good idea to back up your data from the PS4 before sending it for repair. This ensures your important files, game progress, and other data remain safe. A reliable option for data recovery is AOMEI Partition Assistant for Recovery.

This tool can help you recover lost data from various storage devices, including your PS4 hard drive. With its user-friendly interface and powerful recovery features, it ensures your critical data is preserved during troubleshooting or repair. Here’s how to recover your data before proceeding with repairs:

Step 1. Install and launch AOMEI Partition Assistant for Recovery. Choose the exact partition or disk where your data is lost and click Scan.

Step 2. Then, the recovery tool start to scan and search. lt will execute the “Quickly Scan" first for finding your deleted data fast, and then execute the “Deep Scan" for searching other lost data.

Step 3. Once the scan is completed, all deleted files, recycle bins and other missing files will be displayed. Please select the file you would like to recover and then click "Recover".

Step 4. Then, select a folder path to save your recovered files.

Step 5. Wait patiently for this process of recovering ends.

Conclusion

In summary, we’ve covered various methods to fix the white light of death PS4 error, from checking HDMI connections to updating firmware. For efficient data recovery, we recommend downloading AOMEI Partition Assistant for Recovery. This powerful tool helps protect your important files before sending your PS4 for repairs.