AOMEI Partition Assistant Changelog

NOTES:

Some of the new features are only available in paid versions. To learn more, please visit edition comparison.
If you have any ideas or suggestions about AOMEI Partition Assistant, please don't hesitate to tell us via Email, or leaving your message in Facebook, Twitter, and the function you demand will be a part of this software one day.

Version 9.1(December 24, 2020)

Optimized the display of disk index number: starting from Disk 0 so as to keep consistent with the Windows built-in Disk Management.
Fixed issue: the program cannot recognize the Ext4 partitions on mounted Linux system disk.

Fixed issue: volume serial number doesn't display correctly after being modified.

Fixed issue: the Flag of cloned GPT system disk doesn't match to the source disk.

Fixed issue: Runtime Error occurred while installing software.

Download Standard v9.1 (For Free Users) Download Advanced Edition v9.1(For Paid Users)
Version 9.0(November 18, 2020)

Added Shred Files：Destroy unwanted files and privacy data from your computer to avoid being recovered.
Version 8.10 (September 14, 2020)

Fixed some bugs that affected startup.

Optimized "Toolbar": only list commonly used tools so that it become more clean.
Version 8.9 (Augest 14, 2020)

Fixed issue: in some cases, system cannot boot due to disk cloning.

Optimized installation interface.

Optimized some prompt texts.

Reserve licensed information when upgrade to a new version.
Version 8.8 (May 6, 2020)

Fixed issue:Windows To Go Creator displays abnormally after loading a Windows installation file.

Fixed issue: The target system unable to boot when performing OS migration under PreOS mode.

Optimized text display for German interface.

Added ConvertDisk function on the menu bar: one-click to convert a selected disk between MBR and GPT styles without data loss.

Fixed issue: The program crashes during registration.

Fixed issue: The WinPE created on a GPT USB flash drive unable to boot.
Version 8.7 (March 25, 2020)

Fixed issue: The program crashes when updating system information during cloning.

Fixed issue: EntryPoint GetTickCount64 not found in kernel32.dll on startup in Windows XP.

Optimized the registration prompt text;

Optimized the process of entering "Reboot Mode".
Version 8.6 (December 20, 2019)

Added registration verification: To protect the legitimate right of licensee, our system will verify information about license code when launching and registering AOMEI Partition Assistant.

Improved the compatibility of AOMEI Partition Assistant with Windows 10 versions 1903 and 1909.

Fixed issue: Error code 5 or code 11 occurs during the process of migrating OS, and cloning only OS partition or whole system disk.

Fixed issue: Error 0xc00000e occurs after migrating OS, and cloning only OS partition or whole system disk.

Fixed issue: Computer fails to boot after splitting system partition into multiple small partitions.

Fixed issue: The program unexpectedly crashes if you cancel the operation during the process of SSD secure erase.

Fixed issue: The program displays abnormally on the interface of "Resize/ Move Partition".

Fixed issue: Unable to create partitions without drive letter.
Version 8.5 (October 31, 2019)

Optimized Win To Go function.

Added: create Windows To Go for Mac computer so that you can boot Windows on your Mac.

Fixed some bugs and optimized texts.

Optimized: Support for Windows 10 1903.
Version 8.4 (August 5, 2019)

Optimized the interface of "Resize Partition" feature in order to allocate space in a more convenient way.

Fixed issue: drive letter changes when performing operations under PEative environment.

Fixed issue: some interface texts display abnormally.

Fixed issue: hard disk drive wiping process cannot be canceled midway.
Version 8.3 (July 17, 2019)

Optimized task list pane.

Optimized the interaction pattern in a restart mode.

Added: HOVER effect on disk list and disk panel.

Added: Ring display for disk and partition capacity.
Version 8.2 (April 30, 2019)

Fixed issue: error code 5 occurs when migrating OS under Windows PE or Native.

Fixed issue: error code 305 occurs when formatting exFAT to other file systems.

Fixed issue: the program crashes because the interface doesn't refresh in time after registration.
Version 8.1 (March 7, 2019)

Added a new tile-based interface to display disks and partitions. Learn how to change tile-based interface to list interface.

Fixed some random issues.

Optimized several details.
Version 8.0(January 25, 2019)

Brand-new user interface: a more modernized look and feel.

Fixed issue: the program crashes or hangs when performing operations under PreOS mode.

Fixed issue: the Desktop shortcut icon lost.
Version 7.5.1(November 6, 2018)

Optimized installation package of AOMEI Partition Assistant.

Added Languages: Arabic, Dutch (Belgium)
Version 7.5(October 16, 2018)

Optimized text display for some interfaces.

Windows To USB has added to the Windows To Go Creator feature, which is for migrating current system to USB devices and enabling booting from the target movable devices.
Version 7.1(August 23, 2018)

Enhanced "Wipe Hard Drive": added Fill sectors with random data, DoD 5220.22-M, and Gutmann wiping methods.

Enhanced "Delete Partition": added Fill sectors with random data, DoD 5220.22-M, and Gutmann wiping methods when deleting partition.
Version 7.0(April 24, 2018)

Support to automatically restart computer into Windows PE mode to perform operations.

Support Linux EXT4 file system, including create, delete, format, move, and copy EXT4 partition.

Fixed issue: the program hangs when sector-by-sector copying a partition larger than 1TB data.

Fixed issue: the program crashes when performing "Quick Partition" with 4K alignment on a MBR disk larger than 2TB.

Fixed issue: RAM unreadable occurs when performing disk conversions between MBR and GPT under Windows PE mode.

Fixed issue: computer won't boot or displays BSOD after resizing or moving system partition under PreOS mode.

Fixed issue: OS won't boot after migrating to another HDD or SSD under PreOS mode.

Fixed issue: computer won't boot after converting system disk between MBR and GPT under PreOS mode.
Version 6.6(November 23, 2017)

Support exFAT file system, including create, delete, format, move, and copy exFAT partition.

The Windows PE bootable media created on 64-bit system support both UEFI and Legacy BIOS boot modes.

Remove the limitation to resize/move system boot partition in Windows 10, version 1703 and later.
Version 6.5(August 21, 2017)

Added "SSD Secure Erase Wizard": securely erase your SSD to reset the SSD to its factory state for peak performance.

Enhanced Windows To Go Creator: support to choose a system in WIM file.

For safety, add limitation to resize/move boot partition in Windows 10, version 1703 and later under Windows and PreOS environments. However, there is no limitation under Windows PE environment.

Fixed issue: in rare cases, error code 6 occurs during conversion between MBR and GPT.

Fixed issue: an encrypted disk will be initialized.

Fixed some other known issues.
Version 6.3(April 21, 2017)

Added "Integrate to Recovery Environment" wizard: allows you to add AOMEI Partition Assistant and/or AOMEI Backupper into the recovery environment of current system.

Enhanced Windows To Go Creator: support to install Windows 7 onto a USB flash drive or a removable disk.
Version 6.1(December 29, 2016)

Support to create second Ext2/Ext3 partition on SD cards and USB flash drives without formatting.

Fixed issue: drivers are not digitally signed with EV certificate on Windows 10 Anniversary version.
Version 6.0(October 16, 2015)

Enhanced GPT to MBR disk conversion: support to convert a GPT disk that has more than 4 partitions to MBR disk.

Fully clone system disk between MBR and GPT partition styles and ensure system is able to boot from destination disk (e.g. clone system disk from GPT to MBR, MBR to GPT, GPT to GPT, MBR to MBR).

Enhanced the ability of Windows PE bootable disc to recognize devices: automatically integrate existing hardware drivers of current system into Windows PE when creating.

Added an option to manually add hardware drivers into Windows PE bootable disc when creating.

Added an option to choose "Quick Partition" when right click on a disk so that make "Quick Partition" easy to use.

Added a function to check the charge of a laptop before disk partitioning to prevent abnormal shutdown.

Fixed a random issue: system is unable to boot after OS migration.

Fixed a random issue: display Code:12 when performing partition operations under PreOS mode.

Fixed a random issue: display Code:2 - failed to assign a drive letter.

Fixed a random issue: the program stuck at System Updating.

Fixed a random issue of disk clone.

Fixed the issue of progress display when performing partition operations from command prompt.
Version 5.8(September 24, 2015)

Added command line partitioning support for resize/move partitions without data loss, create partitions, delete partitions, format partitions and other partition operations.

Added Quick Partition: very convenient and especially designed for users who need to partition a hard drive regularly or create the same partition layout for large quantities of computers.

Enhanced Windows To Go Creator: support to install Windows 10 onto a USB flash drive or a removable disk.
Version 5.6.4(August 12, 2015)

Fixed issue: display text message in Windows 10.
Version 5.6.3(February 10, 2015)

Updated Languages: German, Italian, Spanish, Polish, and Hungarian.

Added Languages: Dutch, Turkish, and Chinese Traditional.
Version 5.6.2(January 22, 2015)

Support the latest Windows 10.

Fixed issue: Mac partition recognized as unallocated space.

Fixed issue: Autochk program unavailable after partitioning Windows 8/8.1.
Version 5.6(November 28, 2014)

Added an option for OS migration: support for migrating system to destination disk directly.

Added an option for OS migration: keep the partition style of destination disk consistent with source disk.

Fixed random issue: unable to boot Windows from destination disk after OS migration.
Version 5.5.8(August 08, 2014)

Enhanced Windows To Go Creator: add support for Windows 8/8.1 ESD installation (install.esd) file.

Improved NTFS to FAT32 Converter: add support for checking and repairing errors in partition before converting.

Enhanced safety of merging partitions: make a check during merging for ensuring all files have been successfully copied.

Fix the random problem of "Loading system" when partitioning Windows 8.
Version 5.5(December 03, 2013)

Convert system disk between MBR and GPT styles. [paid]

Migrate system to SSD and support MBR and GPT disk. [paid]

Windows To Go Creator, installing Windows 8 to removable flash drive.

Create Windows PE bootable media without having to install AIK/WAIK.

Completely support hard disk with 4096 bytes sector size.

Fully compatible with Windows 8.1.

Improvements in quality and some bug fixes.
Version 5.1

Support multiple languages, including English, German, French, Spanish, Italian, Japanese and Chinese.

Support Windows 8 and Windows Server 2012/2016.
Version 5.0

Partition Alignment: Align partition to boost performance and lifespan of disk.

Rebuild MBR: Rebuild MBR to repair or add boot code.

OS Migration Wizard: Migrate OS to SSD/HDD with simple wizard.

Partition Recovery Wizard: Recover lost or deleted partitions with ease.

Make Bootable CD Wizard: Manage disk partitions under WinPE 3.0 disk.

GPT&MBR Conversions: Convert GPT disk to MBR disk without data losing and vice. versa.

Linux partition management: Create, delete, format, wipe, copy, recover Ext2/Ext3 partition, etc.

Change partition type ID.

Change serial number.
Version 4.0

Allocate Free Space

Merge two partitions

Split one big partition into two or more.

Convert primary partition to logical and vice versa.

Convert FAT partition to NTFS

Improved algorithm to ensure a faster and safer process of resizing/moving partition.

Support GPT disk up to 4TB and USB flash drive.

Compatible with Windows 8 Developer Preview, Windows Home Server 2011 and Windows Small Business Server 2011.
Version 3.0

Disk Copy Wizard.

Partition Copy Wizard.

Wipe single hard disk.

Surface Test.
Version 2.5

Defragment.

Wipe Partition.
Version 2.1

Fully support Windows Vista 64-bit, Windows 7 64-bit and Windows Server 200, 2016 64-bit operating systems.
Version 2.0

Resize/Create/Delete/Hide/Convert/Label partition, Extend Partition Wizard, Change Drive Letter, Set Active Partition, Check Errors.
Version 1.0

Shrink Volume.

Extend Volume.

AOMEI Partition Assistant has been upgrading and adding more new functions

AOMEI Partition Assistant Changelogs